#Bronica sq a manual Manual Pdf
#Bronica sq a manual download

The drive is specifically for the Ai and does not function properly with other SQ models. The main film crank can be removed to attach a winder or speed grip. The red-colored line, next to the orange-colored distance index, is the infrared index.

The drive button is used to set the loaded film to the first frame to be mxnual, after it is aligned to the start-mark, to advance the film for multiple exposures, etc.Īlso OTF metering is possible. The batteries for the motor drive system are checked by set ting the mode selector switch to Sm or Cm and depressing the drive button to check whether there is motor drive operation or not. First, return the mirror lock-up Time t Exposure Set the mode selector switch to Sm or Cm and then depress the battery check button. Then, move the screen removal levers on both sides in the arrow-indicated directions, as illustrated. Discard a battery with leakage or corrosion and thoroughly clean out the battery chamber, before inserting a new battery. Waist-Level Finder and Interchanging Magnifiers. When in focus, however, the two halves will coincide with the displacement disappearing. To open the back cover, squeeze the left and right back cover release buttons, in the arrow-indicated directions, at the same time and the back cover will open. Loading the Battery The electronically controlled shutter will not work without loading the battery.

#Bronica sq a manual Manual Pdf

ZENZA BRONICA SQ-A INSTRUCTIONS MANUAL Pdf Download.įunctions on the Hand-Grip. Helical focusing system built into each lens. For example, if the 80mm lens is focused at a distance of 3m, it can be seen from the depth of field scale that the zone will extend from 2 to 7 meters 6 ft.Įxclusive four-claw Bronica SQ bayonet mount. When C is set to the index, with the mirror lock-up switch lever, however, the lever will not return to N with the next film advancing and shutter cocking action but will stay locked up any manjal of times.

The lens shutter will close completely and the reflex mirror and film safety plate will swing up. Optional accessories, such as external power source plug, NiCd battery recharger, AC adapter, etc, are not supplied but equipment meeting the fol lowing specifications and condi majual will be acceptable. However, the contact cover on the hot shoe must be removed, first, when attaching electronic flash units. The above specifications are subject to change with or without prior notice. Zenza Bronica SQ-A Single lens Reflex Camera. Then, using a pincer or similar tool, lift up the screen with the protrusion at the rear end. Continuous shooting is pos sible if sufficient preloaded film backs are available.

#Bronica sq a manual download

View and Download Zenza Bronica SQ-A instructions manual online. Zenza Bronica SQ-A user manual, instruction manual. The battery holder must be left inside the battery chamber even when taking power from an external source. Use a R filter or equivalent with an infrared black-and white film. View and Download BRONICA SQ-A manual online. Bronica SQ-A Instruction Manual Observe that the cocking pin colour is green on both the lens and body before attaching or removing the lens. Congratulations on your choice of the Bronica SQ-A single lens reflex Although instructions following are based on a standard combination consisting of the.

Bronica sq-a manual